Case Studies & Articles

Buildings with glazed facades reflecting sunlight, undergoing an assessment for reflectivity and glare. Project Overview Deratec was engaged to conduct a solar reflectivity and glare compliance assessment  for a new commercial façade development located on George Street, Sydney CBD . The study addressed requirements by Transport for NSW  and the City of Sydney Council , ensuring that reflective materials visible from nearby transport corridors would not create glare or safety

CFD airflow simulation comparing flat and curved louvre blades by Deratec. Project Overview At Deratec, we help designers and...

Project Overview Deratec was engaged to deliver a JV3 Performance Pathway assessment  under NCC 2022 Section J  for a multi-storey...

Introduction Designing HVAC systems that deliver comfortable and healthy conditions in indoor environments is a complex challenge....

Deratec was engaged to optimise the ventilation system of a battery rack enclosure experiencing high thermal loads during fast charging cycles. Using Computational Fluid Dynamics (CFD), we tested and compared ventilation layouts to ensure the system remained within safe temperature limits — all without costly physical prototyping.

Louvre airflow simulation using CFD, illustrating airflow patterns and velocity distribution in compliance with AS4740:2025 standards....

Introduction Buildings in bushfire-prone areas must ensure that internal environments remain safe and tenable during bushfire exposure,...

CFD simulation visualising jet fan airflow patterns in a car park. Why Reviewing CFD Modelling Reports for Car Park Ventilation is...

Natural ventilation is a sustainable and cost-approach. Introduction Natural ventilation plays a crucial role in building sustainability,...

Condensation risk analysis is a critical aspect of building performance modelling, particularly in Australia, where varying climates...

Flammable gas management is critical for safety across many sectors. Computational Fluid Dynamics (CFD) plays a crucial role in designing...

Project Location:  Weipa, QLD – Cyclonic Zone C Introduction In regions prone to tropical cyclones, such as Weipa (Cyclonic Zone C),...

Tempreture distribution in the Substation room Project: Substation Ventilation Optimal Design Location: Parramatta, NSW Introduction...

In the digital age, data centres are the backbone of modern enterprises, providing the infrastructure needed for cloud services, big data...

Introduction In today's environmentally conscious world, the importance of energy efficiency in building design cannot be overstated. The...

Executive Summary Tunnel ventilation is a critical aspect of tunnel design and safety, essential for ensuring air quality, temperature...

Proper passive ventilation in roof and wall cavities is crucial for maintaining a healthy and energy-efficient home. Computational Fluid...

Assessing and managing condensation risk in buildings involves a comprehensive consideration of various factors. These factors can be...

Overview: This analysis is a comprehensive exploration of Computational Fluid Dynamics (CFD) analysis, focusing on wind loading pressure...

Figure 1. Single Glazed Window Executive Summary: This report details a cost-effective 3D modelling study conducted to assess the...

Introduction: In the dynamic world of construction, the quest for performance excellence often requires a departure from conventional...

Introduction: In the realm of contemporary Australian architecture and construction, the choice of cladding materials is of paramount...

Abstract: This paper introduces Computational Fluid Dynamics (CFD) as an advanced tool for precise wind loading and cladding pressure...

Optimising Commercial Range Hood Performance: A CFD-based Analysis in Compliance with NCC, AS 1668.2